Commissioning – Run the Tigo Energy Intelligence App
EI Residential Solar Solution Installation Manual |
40
3.
Tap the inverter serial number with the Bluetooth symbol.
4.
Tap
START
to begin the Discovery process.
•
The Discovery process establishes direct
communication between the inverter and individual
TS4s that were mapped in the Tigo app.
•
The process may take up to 10 minutes depending
on the strength of the internet connection.
5.
When finished, the number of modules/TAPs placed should match the numbers found. For
example, 16/16.
If not and the number is something like 14/16, check that all TS4s and TAPs are properly
connected and that no TS4s are more than 10m from a TAP. Then repeat the Discovery
process.
Set Up System Access
1.
Tap
System Access
to set access permissions.
2.
Tap the Add icon to enter data for whoever will be
accessing the system such as the installer and system
owner.
