TiGHT AV DSP-AEC-1010-DA Manual Download Page 22

Page: 22 / 36

Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB

-22-

To link several outputs with a common mute and gain control, right-click the output fader and select the Group setting.

3.3.14 USB Soundcard

The USB soundcard can record and playback sound from a computer.

Useful for music playback, recording and teleconferencing using computers. Use the AEC and ANS if necessary for video

conferencing applications. USB functions on the software interface can only be used for recording and file playback.

Soundcard Setting

USB cable with double ends of Type-A can be used to connect DSP processor and host computer. For the initial connection,

“Found New Hardware” will pop up, and the driver will be installed automatically. After installation, USB soundcard will appear
in computer soundcard list as shown below. Users may select USB soundcard in soundcard setting at software playlist.

1 S ong playing

information,

double

click to enter

playlist

Next song

P ause

Song volume

adjustment

5 P lay

P rev. song

S ound recording

list

Sound recording

volume

adjustment

Stop recording

Start

recording

Summary of Contents for DSP-AEC-1010-DA




































Search results

Summary of Contents for DSP-AEC-1010-DA

Reviews:

Related manuals for DSP-AEC-1010-DA

Brands by name

Popular brands

TiGHT AV DSP-AEC-1010-DA, Manual

Search results

Summary of Contents for DSP-AEC-1010-DA

Reviews:

Related manuals for DSP-AEC-1010-DA

Brands by name

Popular brands