Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB
-15-
Attack & Release Time:
Refers to the time required to activate the compressor when the signal goes above the threshold.
Output Gain:
Used to compensate for the gain reduction in the compressor.
G.R. and output Level Meter:
G.R. indicates the compressors amount of gain reduction. Output refers to the output level of the
signal that has passed through the compressor module. Gain reduction is displayed in an inverse level meter.
Limiter
The limiter on the outputs works in similar way as the compressor, but with a high ratio. The output level will not exceed the set
threshold.
The limiter only provides two parameters: Threshold and Release Time.
3.3.4 Auto Gain Control
The Auto Gain Control (AGC) is a dynamic processor used to adjust the signal to a set target level, while maintaining the dynamic
range.
The threshold is set at a very low level with middle-to-slow attack time, long release time and low ratio. The auto gain control
includes silent detection to prevent unwanted changes during silent periods.
Auto gain control may e.g. be used to normalize the level of background music player.
Auto gain control includes the following control parameters and switches:
