Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB
-24-
3.4.2 Device Setting
Information like device name, network address and serial port baud rate can be set in the device settings. Maximum length of
the device name is 16 characters.
Default preset: Two start-up preset modes are available for selection. Select any of the 16 presets as start-up preset.
Alternatively, selecting previously loaded preset will take the last used preset for the next start-up. For the unit to retain the
current parameters after reboot
the “Real time save” function must be on.
3.4.3 Group Setting
The group setting window have separate tabs for input and output groups. 4 groups can be set in each tab. A channel can only
participate in one group. In the same group, the channel volume control and mute functions are linked. Other functions are not
linked. For pairwise linking of all channel parameters, use the link button below the channel fader.
The relationship between groups and link: The channel participating in a group will not
participate in LINK, which means group’s
priority is higher than LINK. The difference between groups and LINK is that groups can only control channel gain and mute,
while LINK includes all parameters in the channel.
