Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB
-27-
3.4.6 Help Menu
(1)
About
Display software version
(2)
Document
Display help file
(3)
Central Control command
This is a tool used to find the string for use with a 3rd party controller.
Open central control command window and click parameters to be controlled on interface, then the window will display the
current command. Copy the command and use UDP or RS232 to send the command to the device.
(4)
Check for updates
Check for software update
4. Control
4.1 External Control Programmer
External control programmer supports UDP and RS232 and controls protocols covering all controls parameters of processor,
including parameter controls, parameter acquisition and preset calling.
When UDP controls are used, the default port is 50000. Ports ca
n be set in “Device Setting” via computer software.
When using RS232 controls are used, the default baud rate is 115200, digit bits is 8, and stop bit is 1, no parity bit. Simil arly,
they can be set in “Device Setting”.
The interval between messages shall keep more than 100mS for RS232 sending.
If central control needs reply, please turn on central control reply switch in “Device Setting”.
