Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB
-7-
2. Hardware
2.1 Safety Instructions
Safety Instructions
Important safety instructions:
1.
Read these instructions.
2.
Keep these instructions well.
3.
Pay attention to all warnings.
4.
Follow all instructions.
5.
Please keep the device away from water. The device shall not be exposed to water drips or water splashes; make sure that
there is no object with liquid near the device, such as vase.
6.
Please use dry cloth to clean up the device.
7.
Please do not block the vent. Please get the device installed based on the manufacturer's instructions.
8.
Please do not install any heat source, such as radiator, heat register, furnace or other devices (including amplifiers) that
generate heat.
9.
Please adopt protective grounding connection to connect the device to the power socket. Please do not use polarized plug
or grounding plug. A polarized plug has two leaves, and one is wider than another. A grounding plug has two leaves and a
third ground terminal. The wide leaf or third ground terminal can provide safety for the users. If the plug provided does not
accord to the power socket, please contact the electrician to replace the old socket with a new one.
10.
Protect the power cord so that it will not be tramped or protruded, especially the plug, the socket and the connections of
cord and device.
11.
Please use the accessories designated by the manufacturer.
12.
Please only use the cart, the tripod, the holder or the desk designated by the manufacturer or sold together with the device.
When using the cart, please take care with the mobile cart/device to avoid injury from rollover.
13.
Please unplug the device during a thunderstorm or during the idle period.
14.
Please find qualified maintenance personnel to deal with all maintenance problems. When the device gets damaged in any
manner, the maintenance is required. For example, the power cord gets damaged, liquid spill or the object falls into the
device; the device is exposed to the rainwater or moisture; the operations are not correct, or the device falls off.
The lightning logo (an equilateral triangle with an arrow) is used to make the users aware of the uninsulated "dangerous voltage"
within the product shell, which may cause electric shock. An equilateral triangle with an exclamation mark is adopted to make
the users understand the importance of the operations and maintenance instructions given in the appendixes attached to the
product.
Warning:
In order to prevent electric shock, please do not use a polarized plug provided by a device with an extension cord.
The socket outlet cannot be inserted except for sharp end.
