Tiara Yachts 53 COUPE Owner'S Manual Download Page 7

Page: 7 / 166

IMPORTANT INFORMATION

Your Tiara Owner’s Manual has been written to include a number of safety in-

structions to assure the safe operation and maintenance of your boat. These

instructions are in the form of

WARNING

and

CAUTION

statements. The follow-

ing definitions apply:

All instructions given in this book are as seen from the stern looking toward the

bow, with starboard being to your right, and port to your left. A glossary of boating

terms is included in the Appendix.

DANGER

DANGER INDICATES A HAZARDOUS SITUATION WHICH, IF NOT

AVOIDED, WILL RESULT IN DEATH OR SERIOUS INJURY.

WARNING

WARNING INDICATES HAZARDS OR UNSAFE PRACTICES WHICH

COULD RESULT IN SEVERE PERSONAL INJURY OR DEATH.

CAUTION

CAUTION indicates hazards or unsafe practices which could result in

minor personal injury, or product and property damage.

NOTICE

NOTICE is used to address best practices not related to physical

injury.

Summary of Contents for 53 COUPE







































































































































































Search results

Summary of Contents for 53 COUPE

Reviews:

Related manuals for 53 COUPE

Brands by name

Popular brands

Tiara Yachts 53 COUPE, Owner'S Manual

Search results

Summary of Contents for 53 COUPE

Reviews:

Related manuals for 53 COUPE

Brands by name

Popular brands