Tiara Yachts 53 COUPE Owner'S Manual Download Page 47

Page: 47 / 166

EQUIPMENT AND FEATURES

1-21

53 COUPE

The transom storage compartment features:

•  Storage for dock lines, fenders, dock poles, etc.
•  AC power outlet
•  Access to the lazarette area containing:

• Volvo

IPS pod units (for boats equipped with Volvo

engines)

• Steering components (for boats equipped with Cummins

engines)

• Generator
• Optional hydraulic swim platform lift system pump

FUEL VAPORS ARE A FIRE AND EXPLOSION HAZARD THAT CAN

RESULT IN SERIOUS INJURY, BURNS, OR DEATH. DO NOT STORE

CONTAINERS OF FUEL OR OTHER FLAMMABLE LIQUIDS IN THE

TRANSOM STORAGE COMPARTMENT OR THE ENGINE ROOM.

WARNING

CAUTION

When raising the transom storage hatch make sure no items are

placed on the buffet. Failure to do so could result in damage or in-

jury.

1.9.6 Swim Platform

The swim ladder is located under the starboard side of the platform. Release the

catch to extend the ladder. Lower the extended ladder down into the water to

assist in boarding the boat from the water.

Summary of Contents for 53 COUPE







































































































































































Search results

Summary of Contents for 53 COUPE

Reviews:

Related manuals for 53 COUPE

Brands by name

Popular brands

Tiara Yachts 53 COUPE, Owner'S Manual

Search results

Summary of Contents for 53 COUPE

Reviews:

Related manuals for 53 COUPE

Brands by name

Popular brands