ThyssenKrupp TW63B, Operating Manual

Page: 79 / 106

Operating manual Appendix
TW63B drive
thyssenkrupp Aufzugswerke 79 Version 09/2018
10 Appendix
10.1 Blocking clamp
NOTE
Leaving the blocking clamp fitted after completion of the installation
work!
Can damage the installation.

Remove the blocking clamp after completion of the installation
work.
A blocking clamp that matches the traction sheave (rim width and design) is part of
each machine
Deployment of the blocking clamp:

During installation work on the elevator car or counterweight to prevent
movement due to slipping ropes.

In the case of work where the rope traction of the system is insufficient, e.g.
removing from the safety gear, use the blocking clamp.
The blocking clamp is to be tensioned via the screwed connection until it is excluded
that ropes will slip.
Item Designation Item Designation
1 Traction sheave 2 Ropes
3 Pressure piece 4 Washer
5 Hexagon nut 6 Spacer sleeve
7 Clamp clip
Fig. 10.1-1
4
5
3
6
2
7
1