Operating manual
Installation
TW63B drive
thyssenkrupp Aufzugswerke
46
Version 09/2018
3. Mount and secure the deflecting pulley with axle on the pulley supports.
4. Set up the frame on the insulation elements according to the general arrangement
drawing.
6.2 Installing and aligning the machine
NOTICE
Wear on rope pulley, traction sheave and rope!
Imprecise alignment of the rope pulley and traction sheave can lead to
excessive wear of the components.
Align the drive on the frame by displacing it along the parallel
distance (ASL) to the outgoing rope.
The rope departure from the traction sheave and diverter pulley is
to be aligned plumb according to plan of installation on the elevator
car rope pulley or the counterweight pulley.
1. Use lifting gear to place the machine on the base frame; the traction sheave
must be on the deflecting pulley side.
2. Move the machine sideways on the base frame in accordance to the punched
grid until the required ASL dimension (parallel gap between the ropes at the rope
departure) is reached
Left-hand design
Right-hand design
Summary of Contents for TW63B
