ThyssenKrupp TW63B, Operating Manual

Page: 73 / 106

Operating manual Special versions (optional)
TW63B drive
thyssenkrupp Aufzugswerke 73 Version 09/2018
9 Special versions (optional)
9.1 Overview of SA special versions
Overview:
SA 3* with brake monitoring (light barrier sensor)
SA 3.1* with brake monitoring (microswitch)
SA 9 Traction sheave position in the shaft (extended drive shaft with pedestal bearing
and machine on compensating supports for statically defined mounting of the drive
shaft
SA11* Side oil drain
SA12 Additional terminal box
SA15 Gear, magnetic clamps and brake test switches* in full Ex version; motor and
encoder in full Ex version
The special versions marked with * are delivered separately due to the risk of damage.
Explanation:
SA3 Brake test switch (light barrier sensor) to check the brake shoe position
(opened-closed) and the brake lining wear.
SA3.1 Brake test switch (microswitch) to check the brake shoe position (opened-
closed) and the brake lining wear
SA11 On version with horizontal motor arrangement for improve accessibility for oil
change
SA 9 Traction sheave position in the shaft (extended drive shaft) with arrangement of
the traction sheave directly in the shaft. The drive shaft is supported here by a bearing.
SA12 Additional terminal box to connect the brake magnets if there is no possibility in
the motor terminal box.
SA15 Gear, magnetic clamps and brake test switch in full Ex version; motor and
encoder in full Ex version
More detailed information as well as technical information for setting up and operation
of full or partial Ex drives can be found in a separate operating manual. These are
delivered with drives with Ex equipment.
The part number for the German instructions is: 60 000 20 86 0
The part number for the English instructions is: 60 000 21 86