Operating manual
Servicing / Maintenance
TW63B drive
thyssenkrupp Aufzugswerke
57
Version 09/2018
8.3 Lubrication
NOTE
Gear and bearing damage
Damage to the gear and outside bearing due to unsuitable lubricant
Use only the specified lubricants.
8.3.1 External warehouses
On delivery, the initial filling took place at the plant.
Material number Denomination
grease quantity
60 300 27 900
AY multipurpose grease F1
400 g cartridge
Annually:
80 g re-lubrication
Table 8.3-1
8.3.2 Gearbox
On delivery, the initial filling took place at the plant.
Lubricant
Replacement interval
Motor position = filling
amount
Synthetic gear oil SM1
For the first time after 4
years
then every 8 years
vertical = 11 litres
horizontal = 9 litres
Table 8.3-2
Never mix different types of oil.
Do not let any oil seep through to the groundwater.
Dispose of old oil as well as cloths contaminated with oil and grease according to
prevailing regional regulations.
Only use lubricants approved by THYSSENKRUPP AUFZUGSWERKE GmbH
Oil change
1. Before the oil change, run the gear until it reaches operating temperature (at
least 35°C).
2. Discharge the gear oil by removing the cap on the oil drain pipe and collect the
old oil in a container specifically designed for the purpose.
Summary of Contents for TW63B
