ThyssenKrupp TW63B, Operating Manual

Page: 54 / 106

Operating manual Commissioning
TW63B drive
thyssenkrupp Aufzugswerke 54 Version 09/2018
If the traction sheave and rope pulley are delivered separately, they are to be
mounted properly.
If the machine was dismantled due to weight, transport or space, removed parts are
to be reassembled to their original state and the mounting parts tightened with the
corresponding tightening torque
.

Chapter
10.2.
7.2 Emergency operation
The TW63B is equipped for emergency operation with a handwinding wheel and a
brake release lever that is delivered separately.
Emergency rescue of trapped persons
1. The brake release lever is to be applied to the cast-on recesses of the ends of
the brake shoes.

Fig. 7.2-1
2. Pressing the levers together presses the brake shoes apart, opening the brake.
3. The brake opens.
4. The handwinding wheel might also have to be moved to bring the elevator car
into the nearest landing.
5. Depending on the load, the elevator car can begin to move quickly after opening
the brake.
6. Immediately let go of the handwinding wheel and control the speed of the
elevator car by pressing the brake release lever with varying degrees of force.

CAUTION
Abrasion injuries
If the handwinding wheel is used for installation and maintenance
purposes (e.g. pulling out of the safety gear), the person performing the
operation must ensure they have a firm and safe stance.
There is also a risk of injury when simultaneously operating electrical
recall.

Pay special attention.