ThyssenKrupp TW63B, Operating Manual

Page: 64 / 106

Operating manual Servicing / Maintenance
TW63B drive
thyssenkrupp Aufzugswerke 64 Version 09/2018
4. Switch the drive to operate the brake shoes while checking the stroke of the
brake shoes. The path should be 0.3 mm + 0.1 mm.

Adjust the stroke
5. In the event of deviations, loosen the lock nuts (
Fig. 8.6-1
, Item 7)
6. Adjust the anchor bolt with an Allen key. On opening the brakes, make sure that
both brake shoes work with the same stroke.
7. Then secure the setting.

Set the initial tension of the springs
A correct setting of the initial tension is only possible within the framework of a
deceleration measurement. In doing so, do not exceed the maximum initial
tension distance of 13.5 mm.
Item Designation Item Designation
1 Oil ventilation 2 Control opening
3 Locking screw with disc 4 Brake shoe pin
5 Brake shoes 6 Armature screw
7 Lock nuts 8 Cover ring
9 Magnetic clamp 10 Rubber disc
11 Washer 12 Armature base plate
Fig. 8.6-1
1
2
3
4
5
10
11
7
6
8 9
12