P8
YoUR RECEIvER
noTE:
5 min after switching the receiver to standby it enters the deep sleep mode. Within this time the
receiver is able to start up quickly. Starting up from deep sleep takes approx. 1 min.
2.3 Rear Panel
Fig. 2
1.
1. sAT In
To connect to the LNB of your satellite antenna for reception of satellite broadcast
signal
2.
2. sAT oUT
To loop through the satellite signal to a second receiver
3.
3. CoAXIAL s/PDIf
To connect to a digital amplifier or home theatre
4.
4. hDMI
To connect to the HDMI input of your TV set using a good quality HDMI cable
5.
5. Tv sCART
To connect to your TV set using a SCART cable
6.
6. IR
To connect the IR extender
7.
7. Power switch
To switch/power your receiver ON or OFF
8.
8. DC PoWER
To connect to the original included main power adapter (Input 110 ~240 V 50~60 Hz/
Output 12 V DC )
2.4 Remote Control
Fig. 3
1.
q
Switches the receiver On/Standby
2.
!
Mutes audio output of the receiver in every mode incl. videotext
3.
fAv
Opens the favourite list selection
4.
LIsT
Shows the satellite selection in viewing mode, in EPG and Timer opens the timer
summary
5.
AUDIo
Opens the list of audio languages
6.
9
Switches between the two last watched channels
7.
RED
In menu for specific functions.
8.
GREEn
In menu for specific functions.
9.
YELLoW
In menu for specific functions.
10.
bLUE
In menu for specific functions.
11.
Shows the current channel information (2x event info, 3x technical info)
12.
EPG
Shows the EPG (Electronic Programme Guide) in TV mode
13.
pq
Menu Off: Change channel to next/previous. Menu On: Moves the cursor up/down.
14.
tu
Menu Off: Decreases/increases the volume level. Menu On: Change settings for specific
Menus and for navigation
15.
ok
Menu Off: Displays the current channel list. Menu On: Opens the highlighted setting or
for confirmation
16.
MEnU
Opens the main menu and from main menu you will get one step back
17.
Exits from the menu, sub-menu or cancels actions
18.
v+/v-
Increases/decreases the volume in all modes incl. videotext
19.
P+/P-
Scroll page wise in all lists
20.
Ch+/Ch-
Programme +/-
21.
0~9
Channel selection or value input
22.
Tv/R
Toggles between TV and RADIO mode
23.
No function
24.
2
To start Timeshift in viewing mode, in Multimedia and HDD Manager to pause
playback of a file
25.
5 6
Fast rewind/Fast forward
26.
4
Starts recording of the current broadcast, pressing once again opens the recording
time to enter
