P6
1. InTRoDUCTIon
1.0 1. InTRoDUCTIon
1.1 safety Instructions
Do noT InsTALL YoUR RECEIvER:
In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a surface which
might obstruct the ventilation slots.
Do noT EXPosE ThE RECEIvER oR ITs ACCEssoRIEs:
•
To direct sunlight or any other equipment that generates heat; to rain or intense moisture; to intense vibration
and to any shock which may cause permanent damage to your receiver or to any magnetic objects, such as
loudspeakers, transformers, etc.
•
Do not use a damaged power cord. It may cause a fire or an electric shock. Do not touch a power cord with wet
hands. It may cause an electric shock.
•
When the receiver is not used for a long period of time, you should unplug the power cord from the wall socket.
•
Do not use alcohol or ammonia based liquids to clean the receiver. If you wish, you may clean your receiver wit h
a soft lint-free cloth slightly made damp with a mild soap solution, and only after disconnecting from the mains
voltage supply. Make sure no foreign objects fall through the ventilation slots because this could cause fire or an
electric shock.
•
Do not place any objects on top of the receiver because this might prevent proper cooling of the components
inside.
safety Precautions
•
Never try to open the receiver. It is dangerous to touch the inside of the receiver due to high voltages and
possible electrical hazards. Opening the receiver will void the warranty of the product. Refer all maintenance or
servicing to suitably qualified personnel.
•
When you are connecting cables, be sure that the receiver is disconnected from the mains supply voltage. Wait
a few seconds after switching off the receiver before you move the receiver or disconnect any equipment.
•
It is a necessity that you only use an approved extension and compatible wiring that is suitable for the electrical
power consumption of the installed equipment. Please ensure that the electrical power supply corresponds
with the voltage on the electrical identification plate at the back of the receiver.
If the receiver does not operate normally, even after strictly following the instructions in the user manual
available on our website www.thomsonstb.net/downloads/manuals/THS813_UM_EN.pdfis recommended to
consult your dealer or the appropriate service for your country.
1.2 storage
Your receiver and its accessories are stored and delivered in a packaging designed to protect against electric
shocks and moisture. When unpacking it, make sure that all the parts are included and keep the packaging
away from children. When transporting the receiver from one place to another or if you are returning it under
warranty conditions, make sure to repack the receiver in its original packaging with its accessories. Failing to
comply with such packaging procedures could damage the product and void your warranty.
1.3 Equipment set-up
We recommend you to consult a professional installer to set up your equipment. Otherwise, please follow the
instructions below:
•
Refer to the user manual of your TV and your antenna.
•
Make sure that the SCART/HDMI cable and outdoor components are in a good condition and the SCART/HDMI
connections are well shielded and from good quality.
The user manual available on our website www.thomsonstb.net/downloads/manuals/THS813_UM_EN.pdf
provides complete instructions for installing and using this receiver. The symbols serve as follows.
