THOMSON Amethyst III, User Manual, Page: 70 / 306

Chapter 3 ’Web Browser Interface’ — GUI Overview
70 Amethyst III DTV Smart Switch
User Manual
Alarms (active and closed) are saved in the flash memory, and are
restored when the equipment is rebooted.
See Appendix F ’Alarms’ for an exhaustive list of alarms.
Clear and Save Buttons
These buttons are located at the top right corner of the Alarm panel.
The Clear button deletes the content of the closed alarms list.
The Save button is used to save the alarms (active and closed) into a text
file. When you click the Save button, a dialog box will appear so that you
can choose the file name and directory for log saving. Once saved, the
log file can be opened and read with any word processor application
software.
Status Bar
Figure 3-9. The status bar
CPU usage
indication
Name and IP address of
the equipment to which the
application is connected
Date
and
time
Global status
of the
equipment
Time
zone
Product
information
Internal
temperature
The status bar gives the following information:
 CPU gives a graphical indication of the CPU load (usage ratio).
 Internal temperature of Amethyst III.

Status gives the general status of the device internal processing.
 if there is one or more errors
 if there is no error but one or more warnings
 if there is no error and no warning
 MAINTENANCE label if the equipment is in maintenance mode
 Name and IP address of the equipment.
 Date and Time give the local time and date.