THOMSON Amethyst III, User Manual, Page: 65 / 306

Chapter 3 ’Web Browser Interface’ — GUI Overview
Amethyst III DTV Smart Switch 65
User Manual
In the list of configurations, the way the name of the configuration is
written in the tab indicates its status.
Table 3-3. List of configurations
Display Example
Type of
configuration
Definition
Green mark prior the
configuration’s name Active
configuration Configuration that
is currently being
used by the
equipment.
Configuration’s name
written between
brackets New configuration Configuration that
has not been sent
to the equipment.
Normal text Configuration sent
to the equipment Configuration that
has been sent to
the equipment but
is not currently
being used.
Color of the tab in a
slightly lighter grey
than the other tabs Displayed
configuration Configuration that
is currently being
displayed in the
working area.
Small star next to the
configuration’s name Configuration in
edition Configuration that
is currently being
modified.
The buttons displayed on the configuration toolbar vary according to the
actions that you are allowed to perform.
Figure 3-4. Configuration toolbar
The toolbar buttons are spread out on two lines:
 The first line contains buttons dedicated to opening or creating a
configuration.
 The second line applies to the configuration that is selected in the list
of configurations.
Possible actions depend on the configuration status (Active
configuration, New configuration, Configuration sent to the equipment,