manualshive.com logo in svg

THOMSON Amethyst III, User Manual, Page: 57 / 306

Share
Download
THOMSON Amethyst III User Manual Download Page 57

Chapter 2 ’Installation and Startup’ — Starting the Application

Amethyst III DTV Smart Switch 

57

User Manual

Starting the Application

1.

Start your Web browser (IE recommended).

2.

Enter the IP address of the Amethyst III equipment in the address line.

The browser starts connecting to the equipment and downloading the 
supervision interface (java applet).

3.

At the very first download, the 

Certificate

 dialog should display, click 

Always

 for using all the Amethyst III functionalities.

4.

Set the device configuration via the Web Browser Interface as 
explained in Chapter 

3

.

It is recommended to open only one Amethyst III applet at a time in the 
Web browser on the same PC.

After the upgrade of an Amethyst, if the JAVA cache is not deactivated, it 
is recommended to remove the resources associated to the previous 
applet version before loading the new applet version or the connection 
to the equipment may fail. To do so:

1.

From the 

Control Panel

, open the Java settings.

2.

In the 

Temporary Internet Files

 area, click 

View

.

Figure 2-10.  Java Control Panel

Summary of Contents for Amethyst III



















































































































































































































































































































Reviews:

No comments