THOMSON Amethyst III, User Manual, Page: 227 / 306

Appendix B ’SNMP Management’ — Registering/Unregistering a Manager to Receive the
Amethyst III DTV Smart Switch 227
User Manual
Registering/Unregistering a Manager to Receive

the Traps
Figure B-2. MIB trap addressee table
To register or unregister a trap receiver, use the
agtStgTrDstTable
table
lines as follows.
For example:

To add 178.3.2.10 as an snmpV2 trap receiver:
SET agtStgTrDstEvalRowStatus.178.3.2.10 integer 4
( Create
and go )
SET agtStgTrDstSnmpVersion.178.3.2.10 integer 2
( snmp v2 )
 To add 178.3.2.20 as an snmpV1 trap receiver:
SET agtStgTrDstEvalRowStatus.178.3.2.20 integer 4
( Create
and go )
SET agtStgTrDstSnmpVersion.178.3.2.20 integer 1
( snmp v1 )
 To remove the178.3.2.10 IP address from the trap receivers list:
SET agtStgTrDstEvalRowStatus.178.3.2.10 integer 6
( destroy )

To retrieve the trap receivers list:
WALK agtStgTrDstEvalRowStatus