Thinklogical SCS160, Product Manual

Page: 63 / 90

S e c u r e C o n s o l e S e r v e r M a n u a l , R e v . K , J u l y , 2 0 1 3 Page 63
Command Description
On Return Online to Data Mode
P Pulse Dialing
Qn Result Codes Enable/Disable
Sr=n Set Register Value
Sr? Read Register Value
T Tone Dialing
Vn Result Code Format
Wn Result Code Options
Xn Result Code Selection
Zn Modem Reset
&Cn Data Carrier Detect (DCD) Control
&Dn Data Terminal Ready (DTR) Control
&En XON/XOFF Pass-Through
&Fn Load Factory Settings
&Gn V.22bis Guard Tone Control
&Kn Flow Control Selection
&Ln Leased Line Operation
&Pn Pulse Dial Make-to-Break Ratio Selection
&Qn Asynchronous Communications Mode
&Sn Data Set Ready (DSR) Control
&Tn Loopback Test (V.54 Test) Commands
&V Display Current Settings
&Wn Store Current Configuration
&Zy=x Store Dialing Command
\An Select Maximum MNP Block Size
\Bn Transmit Break
\Kn Break Control
\Nn Error Correction Mode Selection
\Qn Flow Control Selection
\Tn Inactivity Timer
\Vn Protocol Result Code
-Cn Data Calling Tone
%A Adaptive Answer Result Code Enable
%B View Numbers in Blacklist
%Cn Data Compression Control
%DCn AT Command Control
%En Fallback and Fall Forward Control
%Hn Direct Connect Enable
%Rn Cisco Configuration
%Sn Command Speed Response
$EBn Asynchronous Word Length
$Dn DTR Dialing
$MBn Online BPS Speed
$SBn Serial Port Baud Rate
#CBAn Callback Attempts
#CBDn Callback Delay
# CBF? Callback Failed Attempts Display
# CBFR Callback Failed Attempts Reset