Thermo Scientific thermoflex, Quick Start Manuals

Page: 19 / 220

Thermo Scientific
ThermoFlex 1-1
Safety Warnings
Section 1
Safety
DANGER
WARNING
CAUTION
Make sure you read and understand all instructions and safety precautions
listed in this manual before installing or operating your chiller. If you have
any questions concerning the operation or the information in this manual,
please contact us. See inside cover for contact information.
DANGER
indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury. It is also be used to alert
against unsafe practices.
intended to alert the user to the presence of non-insulated "dangerous
enough to constitute a risk of electrical shock.
This label indicates read the manual.
Performance of installation, operation, or maintenance procedures
other than those described in this manual may result in a hazardous
situation and may void the manufacturer's warranty and safety
compliance.

Observe and never remove warning labels.

Never place the chiller in a location where excessive heat, moisture,
or corrosive materials are present.

The chiller's construction provides protection against the risk
of electrical shock by grounding appropriate metal parts. The
protection will not function unless the power cord is connected to a
properly grounded outlet. It is the user's responsibility to assure a
proper ground connection is provided.

Never operate equipment with damaged power cords.

The circuit protector located on the rear is not intended to act as a
disconnecting means.
