Thermo Scientific thermoflex, Quick Start Manuals, Page: 141 / 220

Thermo Scientific Thermo e
Section 4
Auto Restart
A u t o R e s t a r t
is used to turn the auto restart feature on/off. The factory default setting is disabled but
it may have been enabled using the quick start procedure.
If the auto restart is enabled and the chiller shuts down as a result
of a power failure, when power is restored the chiller will automati-
cally restart and operate at the saved values. Consider any possible
risks before enabling this mode of operation.

Note The chiller will not automatically restart if the
S h o w Q u i c k S t a r t
was enabled, see page 4-20.
In this case only the controller is powered.

CAUTION
Audible Alarms
A u d i b l e A l a r m s
is used to turn the audible alarm on/off.
Use the same procedure described above to enable/
disable the alarms.
In this screen the alarms are disabled.
L i n e F r e q u e n c y 6 0 H z
A u t o R e s t a r t
A u d i b l e A l a r m s
R A F A N S P E E D M O D E
are evel off
S E R I A L C O M M - D C O M
A u t o R e s t a r t
indi-
cates the status, is enabled, is disabled. In this
screen the auto restart is disabled.
L i n e F r e q u e n c y 6 0 H z
A u t o R e s t a r t
A u d i b l e A l a r m s
R A F A N S P E E D M O D E
are evel off
S E R I A L C O M M - D C O M
A u t o
R e s t a r t
feature is enabled.
To change the status highlight the line. Because the
indicates disabled and
indicates enabled. In this screen the feature is still
disabled.
Press the enter key to change the status. In this screen
A u t o R e s t a r t
is enabled.
A u t o R e s t a r t
A u d i b l e A l a r m s
A u t o R e s t a r t
A u d i b l e A l a r m s
A u t o R e s t a r t
A u d i b l e A l a r m s