Thermo Scientific thermoflex, Quick Start Manuals

Page: 113 / 220

Section 3
ThermoFlex 3-13
Thermo Scientific
Water-cooled Chillers
For water-cooled chillers the facility water plumbing connections are also located
on the rear and are labeled
OUTLET. The connections are ½" Female NPT for ThermoFlex900 -
5000, ¾" Female NPT for ThermoFlex7500 - 24000. Both connections for
ThermoFlex900 to 10000 are cast bronze.
The supply connections for ThermoFlex24000 are cast bronze, the return
connections are stainless steel.
Connect the to your facility water supply. Connect
the to your facility water return or drain. Ensure
®
tape is used, ensure the tape does not overhang the
Connect the PROCESS OUTLET to
your application. Ensure all connections are
secure and that the proper sealant/lubricant
®
tape
is used, ensure the tape does not overhang the
chiller
and the instrument being cooled as short as
possible. Ensure tubing is straight and without
make them at the inlet and outlet of your
application, not at the ThermoFlex.
Figure 3-4
Typical Plumbing
Connections (2 of 2)
Process Fluid Flo
w
Process Fluid Flo
w
Application
Figure 3-5 Typical Plumbing Connections, Water-cooled Chillers
See Section or the ecific
locations on your chiller.