Thermo Scientific thermoflex, Quick Start Manuals

Page: 161 / 220

Section 6
ThermoFlex 6-5
Thermo Scientific
Condenser Filter
Failure to clean/replace the condenser filter will cause a loss of
cooling capacit and lead to premature failure of the cooling
s stem.

hermoFlex s s
When it is time for a more thorough cleaning, remove the one-piece grill
and then pulling it away from the top.
he condenser framing and fins located ehind the grill assem l are
ver sharp. se caution when removing the assem l .

Note
ThermoFlex900s - 5000s water-cooled chillers have an embedded
screw(s) located at the top (and bottom) of the grill securing it to the chiller.
Loosen the screw(s) to remove the grill.

Water cooled chillers also have a fan with sharp lades ensure the
chiller is off efore removing the assem l .

For water-cooled chillers, tighten the screw(s) at the top (and bottom) of
the grill.
Replacement grill assemblies are available from Thermo Fisher.
Screw
(Water-cooled chillers)
CAUTION - Sharp edges
Figure 6-3 ThermoFlex900s - 5000s Condenser Grill Removal
ThermoFlex3500s - 5000s water-cooled
chillers have two screws securing the
condenser. One screw on the top and one on
the bottom.
CAUTION
WARNING
WARNING