Thermo Scientific thermoflex, Quick Start Manuals

Page: 160 / 220

6-4 ThermoFlex
Section 6
Thermo Scientific
An effective recommended maintenance plan would include changing
3
additional information.
Fluid Maintenance
Reservoir
Cleaning
(based on your application) is established.
8
Before using an uid or performing maintenance where contact
with the uid is li el refer to the manufacturer s SDS for handling
precautions.

For high temperature chillers ensure the uid is at a safe
temperature elow efore handling.

Reservoir Sight u e
Clean the sight tube by gently pulling up on the plastic funnel housing to
remove it (see illustration on previous page) and then gently pulling out the
Use caution not to scratch the glass.
Before replacing the reservoir housing ensure the reservoir sight tu e
all stopper is securel in place.

to install it in the sight tube.
Wire Mesh Fluid Diffuser
Sight Tube
Ball Stopper
Figure 6-2
Reservoir Cleaning and Diffuser
CAUTION
WARNING