90
Shandon Excelsior ES Operator Guide
Fit the vent adaptor to the instrument rear with the fixings
supplied. Route the ducting to a vented area.
Do not remove the main extraction filters.
Remove the downdraft filter and the metal filter cover. Fit the
downdraft extraction bracket into the filter pocket and press
downwards and forward until it is secure.
Route the ducting to a vented area.
Ensure that the mains supply voltage corresponds with the voltage
rating on the rating plate on the back of the instrument.
Note
1. The ~ symbol on the rating plate indicates that the
instrument operates on an alternating current supply (AC).
Ensure that the I / O power switch at the rear of the instrument is
switched off (O side of the switch pushed IN).
Instruments are supplied with power cords with moulded plugs
suitable for many countries. If another plug is required, it is
necessary for a technically-competent person to remove the
moulded plug from the white power cord (UK-style plug) and fit
a suitably rated, fused plug using the wiring convention shown
below:
Extraction
Vent Adaptor
Downdraft Extraction
Vent Adaptor
Connecting to
Mains Power
Summary of Contents for Shandon Excelsior ES
