Thermo Scientific Shandon Excelsior ES Operator'S Manual Download Page 33

Page: 33 / 131

Shandon Excelsior ES Operator Guide

1. Replace the wax.

Open the cabinet doors, and take out the waste wax tray

•

WW. The Quality Control screen appears.

Take the second waste wax tray WW supplied with the

•

instrument, and put it, with a new liner, back in the

cabinet. In the Quality Control screen, highlight WW

and select [CONFIRM EMPTY].

Add paraffin

•

wax pellets to the empty wax bath W3.

Highlight wax, and select [START HEATING]. While

the wax is heating, go to 2 below.

2. Replace alcohol and xylene.

Take out containers

•

Ex1

(waste alcohol) and

Ex2

(waste

xylene) and dispose of them.

Place fresh 100 % alcohol and fresh xylene into positions

•

Ex1

and

Ex2

In the Quality Control screen highlight the text under

•

alcohol and select [NEW]. Highlight the text under

xylene and select [NEW].

3. Transfer reagents to concealed bottles

Before continuing, ensure that the wax level is correct.

•

Running your next process completes the reagent rotation

•

Summary of Contents for Shandon Excelsior ES




































































































































Search results

Summary of Contents for Shandon Excelsior ES

Reviews:

Related manuals for Shandon Excelsior ES

Brands by name

Popular brands

Thermo Scientific Shandon Excelsior ES, Operator'S Manual

Search results

Summary of Contents for Shandon Excelsior ES

Reviews:

Related manuals for Shandon Excelsior ES

Brands by name

Popular brands