Thermo Scientific Shandon Excelsior ES, Operator'S Manual

Page: 28 / 131

28 Shandon Excelsior ES Operator Guide
1.
Select [DRAIN ALL CHAMBER] and wait till draining
stops.
Open the lid and remove basket(s). If baskets are still shown
2.
in the chamber, press the [LEVEL] key to clear them.
Wipe out the reaction chamber.
3.
With the [LEVEL] key enabled, you can remove baskets a level at
a time after infiltration:
Select [DRAIN NEXT LEVEL] and wait till draining stops.
1.
Open the lid and remove basket (s).
2.
Press [LEVEL] so the screen shows the number of baskets in
3.
the chamber. Repeat steps 1 - 3 until the chamber is empty.
Wipe out the reaction chamber.
4.
When the screen shows there are no more baskets in the chamber,
the Flush screen appears automatically - you are required to flush
the wax in the reaction chamber before starting the next process.
Put empty basket(s) back
1.
in the reaction chamber, and close
the lid.
From the displayed Flush screen, select [START].
2.
For a different Flush program, select [SELECT FLUSH].
When the monitoring screen shows the Flush program has
3.
finished, remove basket (s).
Select [OK].
4.
Excelsior ES is ready to start a new process run.
Removing
Specimens
Flushing and
Rinsing the
Reaction Chamber