Thermo Scientific Shandon Excelsior ES Operator'S Manual Download Page 73

Page: 73 / 131

Shandon Excelsior ES Operator Guide

1. Replace the wax

a. Open the cabinet doors, and take out the waste wax tray

WW. The Quality Control screen appears.

b. Take the second waste wax tray WW supplied with the

instrument, and put it, with a new liner, back in the

cabinet.

In the Quality Control screen, highlight WW and select

[CoNfiRM EMPTy].

c. Add paraffin wax pellets to the empty wax bath W3.

Highlight wax, and select [

START hEATiNG]

. While the

wax is heating, go to 2 below.

2. Replace alcohol and xylene.

a. Take out containers Ex1 (waste alcohol) and Ex2 (waste

xylene) and dispose of them.

b. Place fresh 100 % alcohol and fresh xylene into positions

Ex1

and

Ex2.

In the Quality Control screen highlight the text under alcohol

and select

[NEw

]. Highlight the text under xylene and select

[NEw].

3. Transfer reagents to concealed bottles.

Before continuing, ensure that the wax level is correct.

Running your next process completes the reagent rotation.

Summary of Contents for Shandon Excelsior ES




































































































































Search results

Summary of Contents for Shandon Excelsior ES

Reviews:

Related manuals for Shandon Excelsior ES

Brands by name

Popular brands

Thermo Scientific Shandon Excelsior ES, Operator'S Manual

Search results

Summary of Contents for Shandon Excelsior ES

Reviews:

Related manuals for Shandon Excelsior ES

Brands by name

Popular brands