3-10
DB-074 E
RadEye GX, GX-L
Pi/Ff 14.09.2016
3.1.6
Operation mode
This submenu is used to select between ratemeter and scaler
mode. A “
” shows the active configuration.
3.1.7
Scaler parameter
This submenu is used to set the parameters for scaler measure-
ments. Preset TimeMode is used to measure a defined time. Pre-
set CntMode is used to measure a defined number of counts. With
“Auto restart” the RadEye GX restarts automatically the meas-
urement. “Set Time/Count” edit the preset time and count.
3.1.8
Nuclide table
The submenu Nuclide table is only available in activity mode
(Bq, dps, dpm, Bq/cm
2
). A “
” shows the selected nuclide.
