Thermo Scientific LevelPRO, User Manual

Page: 47 / 128

Operation
Mode/Fault Alarm Setup
Alarms have three operational modes.
–
Disable – The alarm is disabled, and no alarm action is executed.
– Enable – The alarm is enabled. The selected alarm action is executed based on the
alarm set condition.
– Inhibit – The alarm is temporary disabled. Another operation may change the
mode of this alarm from Inhibit to Enable.
After selecting an operational mode, the user may select an output source for the alarm
action. The actions available are:
–
Do Nothing (Do not take any actions)
– Relay Output A
– Relay Output B
– Current Output A
– Current Output B
– Current Output C
Once an output source has been selected, an alarm action can be selected on either the
Current Output or Relay Outputs screens. For further information on these screens,
see these respective sections.
Thermo Scientific LevelPRO User Manual
4-7