Thermo Scientific LevelPRO, User Manual

Page: 45 / 128

Operation
System Status
Configuration The System Control Configuration screen provides the user with the ability to set up
system parameters related to items such as the system clock and the LCD screen. The
detector should be able to read and write any of these parameters as requested by the
user.
To access the information on the System Control Configuration screen using only the
remote transmitter keypad, see
Figure A-17 .
1. Set the system date and time.
a.
Choose the desired date format. The available options are:

MM/DD/YY

DD/MM/YY

YY/MM/DD
b. In the System Date textbox, enter the current date.
c. Enter the current time in the System Time textbox, using the format
HH:MM:SS.
To synchronize the date and time of the LevelPRO system with that of the PC in
use, check the Use PC Date/Time textbox.
2. The LCD scroll time dictates the length of time information takes to scroll across
the LCD screen. If the system in use is an integrated system, enter the desired
scroll time in the Integrate Scroll Time (sec) textbox. If the system in use is a
remote system, enter the desired scroll time in the Remote Scroll Time (sec)
textbox.
3. The LCD contrast can be adjusted on the Remote unit by adjusting the LCD
Contrast value. The value can range from 0 – 99.
4. Click Submit to save.
Note:
At this time, it is strongly recommended that configuration information
be saved to your computer. If the work has been completed off-line, connect
to the level detector via one of the serial ports and upload the configuration
file to the detector.
System Status The System Status screen auto-populates with information about the system status,
detector and diagnostics.
To access the information on the System Status screen using only the remote
transmitter
keypad, see Figure A-16 .
Thermo Scientific LevelPRO User Manual
4-5