Thermo Scientific LevelPRO, User Manual

Page: 23 / 128

Chapter 2
EZ Cal II Overview
Features The EZ Cal II PC user interface software provides a way for users to interact with the
LevelPRO detectors.
The LevelPRO integrated units do not have a keypad or display screen. This prohibits
users from controlling and configuring the detector. Connecting the integrated unit to
a PC running the EZ Cal II software provides the user with these capabilities.
The LevelPRO-T remote units include a keypad and display screen. All of the
operations available to the user through use of the detector’s keypad are also available
in the EZ Cal II software. Using the software allows the user to be away from the
detector and provides a more user-friendly interface for interaction.
The EZ Cal II PC user interface software provides the user with:
– The ability to connect to the detector via USB, RS232, RS485 (2/4wire), and
Ethernet.
– The ability to configure communication ports A and B.
– The ability to configure the Ethernet port.
– The option to configure the system control setup.
– The option to display the system status.
– The option to configure the alarms and display the status of alarms.
– The option to configure the execution of system commands.
– The option to configure physical input and output setup and display the current
status of each.
– The option to configure detector setup.
– The option to configure level application setup.
– The option to flash application firmware to the detector’s main board.
– Access to a setup wizard for quick detector configuration.
– Access to a calibration wizard to calibrate all physical inputs and outputs.
– An option to upload configuration from a detector to the PC and save it to a file.
– An option to download a file configuration from a PC to the detector.
– The option to enter a special password for cold and warm start operation.
Thermo Scientific LevelPRO User Manual 2
-
1