Thermo Scientific Haas Mini Mill, User Manual, Page: 24 / 68

Chapter 2 Machine Operation
User Manual - Haas Mini Mill AA83766
8
4. The PM axles and the positioning axle of AMP will move to the operator loading position.
Figure 2.10
The above screen will appear to ask the operator to:
♦ Remove any previous sample from the vice.
♦ Place a new sample.
♦ Close the PM door.
5. On the Simatic mobile panel, press START to launch the milling cycle.
Service Mode
Pneumatic Items Test
1. On the Simatic mobile panel, select SERVICE 1/2 : Pneumatic
Figure 2.11
2. On the Simatic mobile panel, press on the different commands to move the pneumatic items.