Thermo Scientific Haas Mini Mill, User Manual

Page: 21 / 68

Machine Operation Chapter 2
AA83766 User Manual - Haas Mini Mill
5
ISO Programs on the PM
The selected production program on the Haas must be the number 50. This is the main program that calls the
sub-ISO programs depending on the type of milling.
In case of handling of the programs of the PM, check that the program 50 is still selected at the end of the
operations.
Figure 2.5
On the Haas Control Panel, Press LIST PROG then select the program 50 with the arrows of the cursor.
Press SELECT PROG and WRITE/ENTER .
Figure 2.6