Thermo Scientific dionex ic pure water, Operating Instructions Manual

Page: 39 / 128

Thermo Scientific Dionex IC Pure system |
29
Installation |
Chapter 7
Step Action Figure
1 a. Remove the tube jumper from the “IN“ connections
on the right side of the Dionex IC Pure system.
b. Attach the “connecting hose 20 L tank to IC Pure“
supplied with the unit to the
“IN“ connection. Attach
the „“Drain hose IC Pure (d8 mm (31 in) with quick
disconnect)“ to
“OUT“ connection on the unit. Route
the tube from the “OUT“ nozzle with a downward
slope to the drain
.
c. If you are using a pretreatment cartridge in the unit,
remove the tube jumper from the left concentrate
connection on the Dionex IC Pure system and route a
o.d. 8 mm (0.31 in) tube to the left connection of the
20 L tank.
d. Attach the tube from the 'IN' nozzle on the unit to one
of the two connections on the external 20 L tank.
e. Attach the o.d. 8 mm (0.31 in) tube into the right
connection of the external 20 L tank for tank overflow
and route the tube with a downward slope to the
drain.
Note If you are not using a pretreatment cartridge,
skip to step d.
Note Either of the two connections on the external 20
L tank may be used to attach the tube to the unit.
IN / OUT Connections
o.d. 8 mm (0.31 in) tubes
a.)
b.)
d.)
20 L tank
connections
Concentrate
connection
c.)
20 L tank
connection for
tank overflow
e.)
o.d 8 mm (0.31 in) tube coming from
concentrate connection of Dionex IC Pure
system. Connected only if pretreatment
cartridge is used with IC Pure system.
o.d. 8 mm (0.31
in) tube