3 • Operation and Maintenance
Doc. 065259-05 10/12
35
The following two commands are available only if the optional valve is
installed and configured as an auxiliary valve (see
•
AuxValve.A
: Sets the valve to the A position.
•
AuxValve.B
: Sets the valve to the B position.
Adding, Modifying, and Deleting Commands
•
To add a command to the end of the
Command/Parameters
table,
select the command in the
Command
list, enter the command
parameters (if any), and click
Insert
(Chromeleon 7) or
Append
(Chromeleon 6.8).
•
To add a command above another command in the
Command/
Parameters
table, first select the command listed immediately below
the intended location of the new command. Then, in the
Command
list, select the command to be added, enter the command parameters
(if any), and click
Insert
. The original command remains selected, to
allow you to easily add commands in chronological order.
•
To change an existing command, select the command in the table,
change the command parameters or select a new command, and click
Change
(Chromeleon 7) or
Modify
(Chromeleon 6.8).
•
To delete a command from the
Command/Parameters
table, select
the command and click
Delete
.
Notes:
•
The
EndSamplePrep
command cannot be deleted.
•
In Chromeleon 6.8, the
Inject
command is always the last command
in the list; it cannot be moved or deleted.
Summary of Contents for Dionex AS-DV
Page 1: ...Dionex AS DV Autosampler Operator s Manual Document No 065259 Revision 05 October 2012 ...
Page 8: ...Dionex AS DV Operator s Manual vi Doc 065259 05 10 12 ...
Page 30: ...Dionex AS DV Operator s Manual 22 Doc 065259 05 10 12 ...
Page 132: ...Dionex AS DV Operator s Manual Index 6 Doc 065259 05 10 12 ...