Thermo Scientific CryoStar NX70 series Operator'S Manual Download Page 43

Page: 43 / 116

Thermo Scientific CryoStar NX70 Operator Guide

Temperature

Both the specimen head and the blade holder are actively cooled and the user can adjust either
temperature independently.

Setting the temperature of the specimen head

•

Press the "Specimen Head Temperature" button on the Main screen.

•

The Temperature Specimen Head screen will be displayed.

•

Either select one of the pre-set temperatures (-40°C, -30°C, -20°C or -10°C) or adjust the

temperature using the arrow keys.

•

Press "OK" to confirm the setting and to return to the Main screen.

•

Press the "Back" button to exit back to the Main screen without saving the changes.

Note

The new set temperature is displayed in white on the Main screen until the temperature is reached.

Summary of Contents for CryoStar NX70 series





















































































































Search results

Summary of Contents for CryoStar NX70 series

Reviews:

Related manuals for CryoStar NX70 series

Brands by name

Popular brands

Thermo Scientific CryoStar NX70 series, Operator'S Manual

Search results

Summary of Contents for CryoStar NX70 series

Reviews:

Related manuals for CryoStar NX70 series

Brands by name

Popular brands