Thermo Scientific CryoStar NX70 series Operator'S Manual Download Page 84

Page: 84 / 116

Thermo Scientific CryoStar NX70 Operator Guide

Default Settings

If required, the instrument can be reset to the default settings.

To restore the Default Settings:

•

Press the "Menu" button on the Main screen.

•

The Menu screen will be displayed.

•

Press the "Settings" button.

•

The Menu: Settings screen will appear.

•

Press the "Default Settings" button.

•

The Menu: Settings: Default Settings screen will be displayed.

•

Press the "OK" button to restore the default settings and to return the Main screen.

•

Press the "Back" button three times to return to the Main screen without restoring the default

settings.

Note

A message appears on the Main screen to inform the user that the default settings have been restored. The
message disappears after approximately 3 seconds.

Summary of Contents for CryoStar NX70 series





















































































































Search results

Summary of Contents for CryoStar NX70 series

Reviews:

Related manuals for CryoStar NX70 series

Brands by name

Popular brands

Thermo Scientific CryoStar NX70 series, Operator'S Manual

Search results

Summary of Contents for CryoStar NX70 series

Reviews:

Related manuals for CryoStar NX70 series

Brands by name

Popular brands