Thermo Scientific CryoStar NX70 series Operator'S Manual Download Page 49

Page: 49 / 116

Thermo Scientific CryoStar NX70 Operator Guide

Turning off the Vacutome function

•

Press the yellow "Vacutome" button on the Main screen.

•

Press the yellow "Vacutome" button on the Vacutome screen - the button will now appear white.

•

Press "OK" to confirm the setting and to return to the Main screen.

•

Press the "Back" button to exit back to the Main screen without saving the changes.

Turning On the cleaning mode

To activate the cleaning mode:

•

Press the "Vacutome" button on the Main screen.

•

The Vacutome screen will be displayed.

•

Press "Cleaning Mode" to activate this mode.

Note

The "Cleaning Mode" button turns yellow to indicate that this function is now activated.

The cleaning mode will switch of automatically after 10 minutes.

•

Press "OK" to confirm the setting and to return to the Main screen.

•

Press the "Back" button to exit back to the Main screen without saving the changes.

•

To clean the cooling chamber, remove the Vacutome hose from the nozzle plug and then:

Wash and dry the cooling chamber using a cloth or paper towel, and appropriate cleaning

agents.

Summary of Contents for CryoStar NX70 series





















































































































Search results

Summary of Contents for CryoStar NX70 series

Reviews:

Related manuals for CryoStar NX70 series

Brands by name

Popular brands

Thermo Scientific CryoStar NX70 series, Operator'S Manual

Search results

Summary of Contents for CryoStar NX70 series

Reviews:

Related manuals for CryoStar NX70 series

Brands by name

Popular brands