Thermo Scientific CryoStar NX70 series Operator'S Manual Download Page 42

Page: 42 / 116

Thermo Scientific CryoStar NX70 Operator Guide

•

Either select one of the pre-set values (400µm, 200µm, 100µm or 10µm) or adjust the value

using the arrow keys.

•

For details of the thickness steps, refer to the

Technical Specifications section

•

Press "OK" to confirm the setting and to return to the Main screen.

•

Press the "Back" button to exit back to the Main screen without saving the changes.

To set the fine section thickness:

Press the "Fine Section Thickness" button on the Main screen.

The Fine Section screen will be displayed.

•

Either select one of the pre-set values (100µm, 50µm, 10µm or 5µm) or adjust the value using

the arrow keys.

•

For details of the thickness steps, refer to the

Technical Specifications section

•

Press "OK" to confirm the setting and to return to the Main screen.

•

Press the "Back" button to exit back to the Main screen without saving the changes.

Summary of Contents for CryoStar NX70 series





















































































































Search results

Summary of Contents for CryoStar NX70 series

Reviews:

Related manuals for CryoStar NX70 series

Brands by name

Popular brands

Thermo Scientific CryoStar NX70 series, Operator'S Manual

Search results

Summary of Contents for CryoStar NX70 series

Reviews:

Related manuals for CryoStar NX70 series

Brands by name

Popular brands