manualshive.com logo in svg

Thermo Scientific 48iQTL, Instruction Manual

Share
Download
Thermo Scientific 48iQTL Instruction Manual Download Page 91

Operation 

Settings 

Thermo Scientific 

48iQTL Instruction Manual     

3-67

 

 

The Averaging Time screen allows the user to choose dynamic filtering or a 
manually selected (static) averaging time. The 48iQTL, by default, uses 
dynamic filtering to smooth output data. 

Dynamic Filtering allows for data smoothing without compromising 
response time. When dynamic filtering is enabled, the instrument software 
automatically changes the averaging time giving the user faster response 
times when conditions are rapidly changing; smoother and stable readings, 
when conditions aren’t changing as rapidly; and as an added bonus, it 
better processes spikes to minimize their impact on the data. At the same 
time it will preserve the representative nature of the filtered data to the 
conditions being sampled. 

Averaging Time defines the time period (1 to 300 seconds) during which 
CO measurements are taken. The average concentration of the readings are 
calculated for that time period. The front panel display and analog outputs 
are updated every second if averaging time is greater than 1 second. An 
averaging time of 10 seconds, for example, means that the average 
concentration of the last 10 seconds will be displayed at each update. An 
averaging time of 300 seconds means that the moving average 
concentration of the last 300 seconds will be the output at each update. 
Therefore, the lower the averaging time the faster the front panel display 
and analog outputs respond to concentration changes. Longer averaging 
times are typically used to smooth output data. 

Note  

When Dynamic Filtering is selected, the user selected Averaging 

Time button is disabled. 

▲

  

Home Screen>Settings>Measurement Settings>Averaging time (single 
range mode)

 

 

Averaging Time

Summary of Contents for 48iQTL

























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands