manualshive.com logo in svg

Thermo Scientific 48iQTL, Instruction Manual

Share
Download
Thermo Scientific 48iQTL Instruction Manual Download Page 261

Safety, Warranty, and WEEE 

Warranty 

Thermo Scientific 

48iQTL Instruction Manual     

A-3

 

prevailing time and materials rates.  If Seller provides repair services or 
replacement parts that are not covered by the warranty provided in this 
warranty, Buyer shall pay Seller therefor at Seller's then prevailing time and 
materials rates.  ANY INSTALLATION, MAINTENANCE, REPAIR, 
SERVICE, RELOCATION OR ALTERATION TO OR OF, OR 
OTHER TAMPERING WITH, THE PRODUCTS PERFORMED BY 
ANY PERSON OR ENTITY OTHER THAN SELLER WITHOUT 
SELLER'S PRIOR WRITTEN APPROVAL, OR ANY USE OF 
REPLACEMENT PARTS NOT SUPPLIED BY SELLER, SHALL 
IMMEDIATELY VOID AND CANCEL ALL WARRANTIES WITH 
RESPECT TO THE AFFECTED PRODUCTS. 

THE OBLIGATIONS CREATED BY THIS WARRANTY 
STATEMENT TO REPAIR OR REPLACE A DEFECTIVE PRODUCT 
SHALL BE THE SOLE REMEDY OF BUYER IN THE EVENT OF A 
DEFECTIVE PRODUCT.  EXCEPT AS EXPRESSLY PROVIDED IN 
THIS  WARRANTY STATEMENT, SELLER DISCLAIMS ALL 
OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, ORAL 
OR WRITTEN, WITH RESPECT TO THE PRODUCTS, 
INCLUDING WITHOUT LIMITATION ALL IMPLIED 
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY 
PARTICULAR PURPOSE.  SELLER DOES NOT WARRANT THAT 
THE PRODUCTS ARE ERROR-FREE OR WILL ACCOMPLISH 
ANY PARTICULAR RESULT. 

Summary of Contents for 48iQTL

























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands