manualshive.com logo in svg

Thermo Scientific 42iQHL, Instruction Manual

Share
Download
Thermo Scientific 42iQHL Instruction Manual Download Page 165

Operation 

Settings 

Thermo Scientific 

42iQHL Instruction Manual     

3-137

 

 

The Update Bootloader screen allows the user to update bootloader and 
reboot the instrument. The bootloader is a small program that interfaces 
with our hardware and runs our operating system on power-up. The 
bootloader may change to optimize hardware settings or if there are 
changes to the hardware. If the button is blue, an update to the bootloader 
is available. If button is greyed out, no update is needed. 

Home Screen>Settings>Update Bootloader

 

 

The Update Bootloader screen contains the following information: 

●

 

Reboot and Update:

 Update bootloader and reboot instrument. 

●

 

Exit:

 Exits screen. 

 

 

Update Bootloader

Summary of Contents for 42iQHL



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands