Thermo Scientific 42iQHL Instruction Manual Download Page 159

Page: 159 / 322

Operation

Settings

Thermo Scientific

42iQHL Instruction Manual

3-131

The Download Data To USB Drive screen allows the user to
download/upload data to/from the USB drive.

Home Screen>Settings>USB Drive>Download Data To USB Drive

The Download Data to USB Drive screen contains the following
information:

●

Download Health Check Report:

Includes status and alarms, preventive

maintenance, and maintenance history.

●

Download Entire Data Log:

Includes the entire data log (from data

logging).

●

Download Service Log:

Includes a complete listing of data for all

variables. This is set at the factory.

●

Download System Log:

Consists of system log text files, which include a

listing of system errors.

●

Download Calibration History:

Includes the data in the calibration

history screen.

●

Download Configuration Data Backup to USB:

Allows the user to

download the configuration file from the instrument to the USB.

●

Upload Configuration Data Restore from USB:

Allows the user to upload

the configuration files from the USB to the instrument.

●

Restore:

Allows the user to upload the configuration files from the USB

to the instrument.

●

Download All Data:

Downloads all reports, logs, histories, and backup

information.

Download Data To USB

Drive

Summary of Contents for 42iQHL



































































































































































































































































































































Search results

Summary of Contents for 42iQHL

Reviews:

Brands by name

Popular brands

Thermo Scientific 42iQHL, Instruction Manual

Search results

Summary of Contents for 42iQHL

Reviews:

Brands by name

Popular brands