28
TK 56704-1-OP-EN
The keys on either side of the display are dedicated or "hard" keys. Their
function always remains the same.
This key is used to turn the unit on. First the display will briefly show the
Thermo King Logo and then the statement "Configuring System - Please
Wait". When the power-up sequence is complete the display shows the
Standard Display of box temperature and setpoint. For more information
see "Turning the Unit On and Off" later in this section.
This key is used to turn the unit off. First the display will briefly show
"System is Powering Down - Please Wait. Press On to Resume" and then
"Off" will appear momentarily. When the power-down sequence is
complete the display will be blank. For more information see "Turning the
Unit On and Off" later in this section.
This key is used to initiate a manual defrost cycle. For more information
see "Initiating a Manual Defrost Cycle" later in this section.
This key is used to lock out high speed operation in noise sensitive areas.
For more information see "Selecting High Speed Lockout" later in this
section.
Note:
The Thermo King Premium Truck HMI Control Panel features a High
Speed Lock-Out key as shown here. The Thermo King Truck HMI
Control Panel features a Cycle Sentry key in this position. When
using the Thermo King Premium Truck HMI Control Panel, Cycle
Sentry Mode or Continuous Mode is selected from the Main Menu –
Mode Submenu as shown later in this section.
Soft Keys
Figure 14.
Soft Keys
The four "soft" keys under the display are multi-purpose keys. Their
function changes depending on the operation being performed. If a soft
key is active the key function is shown in the display directly above the
key. The keys are numbered from left to right, with Key 1 on the far left
and Key 4 on the far right.
Summary of Contents for T-1090 SPECTRUM
Page 109: ...TK 56704 1 OP EN 109 N No ot te es s...
Page 110: ...110 TK 56704 1 OP EN N No ot te es s...
