26
TK 56704-1-OP-EN
Operating Instructions for Premium
HMI Control Panel
Truck Premium Display HMI Control Panel
The Truck Premium Display is used to operate the unit, display unit
information, and access all Maintenance and Guarded Access Menus. The
Truck Premium Display communicates with the Base Controller via the
Controller Area Network (CAN) bus. It is connected to the Base Controller via
CAN Connector J14 on the interface board. The Truck Premium Display is
typically located in the vehicle driver’s compartment. It may be installed in
the truck instrument panel using a DIN mounting ring or under the
instrument panel using an under dash mounting kit.
Figure 11.
Truck Premium HMI Control Panel
The HMI control panel consists of a display and 8 touch-sensitive keys.
The display is capable of showing both text and graphics.
The keys on the left and right sides of the display are dedicated single
function “hard” keys.
The four keys under the display are “soft” keys. The functions of these soft
keys change depending on the operation being performed. If a soft key is
active the current key function is shown in the display directly above the key.
Display
The display presents information to the operator. This information includes
setpoint and temperature for each zone, unit or zone operating information,
gauge readings, temperatures, and other information as selected by the
operator.
Summary of Contents for T-1090 SPECTRUM
Page 109: ...TK 56704 1 OP EN 109 N No ot te es s...
Page 110: ...110 TK 56704 1 OP EN N No ot te es s...
