Thermia Calibra Cool, Installation Manual

Page: 35 / 44

Symbol Description
Home.
Back to start screen.
Information.
Shows information about the respective page.
This symbol indicates that the text that follows can be pressed to open a new view.
Alarm. Press on the symbol to go to the alarm window.
The window displays the alarm history.
Alarm. Indicates that there are active class A or class B alarms. Press on the symbol to go to the alarm window.
Select operating mode.
Press on the symbol to select operating mode. A new window opens for selection of operating mode.
Operating data.
Opens a number of sub-menus which show current operating data such as:
▪
Outdoor temperature
▪
etc.
Factory reset.
Resets values on the current menu page to factory values.
Settings.
Opens a number of sub-menus such as:
▪
Language
▪
System settings
▪
Heating
▪
etc.
Back.
Back to previous view.
Push-pull control.
Used for raising or lowering values. Press on the "handle" and push it to the sides.
Alternatively, press "+" or "-".
Activation/deactivation of push-pull control or switch functions/equipment on/off. Press on the symbol to
change mode.
The symbol indicates activated function/equipment switched on.
Activation/deactivation of push-pull control or switch functions/equipment on/off. Press on the symbol to
change mode.
The symbol indicates deactivated function/equipment switched off.
Certain menu selections are locked to prevent unauthorised use. An authorisation code is required.
L
Anti legionella mode. Visible in the top of the display when the heat pump is in anti legionella mode.
Compressor mode. Visible in the top of the display when the heat pump is producing heat or hot water with
the compressor. During oilboost, the compressor's own automatic maintenance function, the text "Oilboost"
will be visible with the compressor symbol in the drop down menu.
Cooling mode. Visible in the top of the display when the heat pump is in cooling mode.
EXT.
External auxiliary mode. Visible in the top of the display when the heat pump is producing heat or hot water
with the external auxiliary heater.
Idle mode. Visible in the top of the display when the heat pump has no heating, cooling or hot water de-
mand.
1
Internal immersion heater mode. Visible in the top of the display when the heat pump is producing heat or
hot water with the internal immersion heater. The number indicates which step is used.
Installation Guide Calibra Cool
Thermia AB BWCC01IG0102
35