Thermia Calibra Cool Installation Manual Download Page 38

Page: 38 / 44

9.2

How to set up additional accessories, functions etc.

For more detailed information and system solutions see separate instruction or system solution generator on the web.

Note: Functions not activated/enabled from factory must be enabled and activated in the control system before they can be used.

Below is an example how you enable a function, you enable the different functions in a similar way.

1. Login: 607080
2. Go to SETTINGS/INSTALLATION and select desired function. Activate by selecting "BM" if function is connected to BM-card, select

EM3:0 if connected to EM3.

3. Go to SETTINGS menu again and select the function previously activated in installation menu and activate the function by pressing

the switch.

4. Make desired settings and confirm.
5. Restart heat pump and check functionality.

Installation Guide

Calibra Cool

BWCC01IG0102

Thermia AB

Summary of Contents for Calibra Cool













































Search results

Summary of Contents for Calibra Cool

Reviews:

Related manuals for Calibra Cool

Brands by name

Popular brands

Thermia Calibra Cool, Installation Manual

Search results

Summary of Contents for Calibra Cool

Reviews:

Related manuals for Calibra Cool

Brands by name

Popular brands